PA HIC #5653 · Registered Master Plumber · Certified Backflow Tester📞 215-364-0133
Angermeier Plumbing service trucks in Warminster, PA

Warminster Township · Bucks County · 18974

Certified Backflow Testing in Warminster, PA

Annual certification testing, device rebuilds and replacement — tested by a PA-certified backflow tester and filed with your authority. Warminster is a ten-minute run from our Southampton shop, and we schedule commercial tests around your operating hours.

Report filed for you · Rebuild kits on the truck · Free estimates on repairs

Backflow Testing in Warminster

Warminster has more commercial backflow than almost anywhere else we cover. The old Naval Air Warfare Center parcel and the industrial and flex space along Jacksonville Road and County Line carry large RPZ and double-check assemblies, often on fire service as well as domestic. The Street Road retail corridor adds restaurant and food-service hazards on top of that.

Flex and warehouse tenants, fire-line assemblies, restaurants, and a steady base of township homes with lawn irrigation off the Warminster Authority service.

The Warminster Municipal Authority runs the cross-connection control program here and expects a certified tester's report on file every year.

Devices We Test & Repair

RPZ assemblies

Reduced pressure zone devices on high-hazard connections — restaurants, medical offices, boiler feeds and chemically treated systems.

Double check valve assemblies

DCVA units on lower-hazard services including fire lines and some irrigation connections.

Irrigation & lawn sprinklers

Initial certification on new systems and annual spring testing before start-up.

Fire line assemblies

Testing and repair coordinated with your sprinkler contractor so the system returns to service properly.

Boiler make-up feeds

Backflow protection on hydronic boiler fill lines, tested and rebuilt as needed.

Device repair & replacement

Rebuild kits for common Watts, Febco, Wilkins and Zurn assemblies, and full replacement when a device is obsolete or frozen.

How the Test Works

1. Identify the assembly

Make, model, size, serial number, hazard type and location — the authority's form needs every field.

2. Notify and isolate

The test shuts water downstream briefly, so we schedule around your business hours or irrigation schedule.

3. Run the certified gauge test

A calibrated differential-pressure gauge checks each check valve and the relief valve against required differentials.

4. Rebuild if it fails

Most failures are worn rubber. We carry common rebuild kits so a failed device is usually repaired and retested the same visit.

5. File the report

We sign the certified report with gauge readings and calibration data and submit it so your record stays current.

Backflow prevention assembly tested in Warminster, PA

Schedule a Backflow Test in Warminster

Have the notice handy — the device serial number helps us load the right kit.

or call 215-364-0133

FAQ

Warminster Backflow Questions

Do you do backflow testing in Warminster, PA?

Yes. We are a PA-certified backflow tester and Registered Master Plumber (PA HIC #5653) testing RPZ, double-check, irrigation and fire-line assemblies throughout Warminster and the surrounding Bucks County area. Call 215-364-0133 with the notice in hand and we will schedule it.

Does the Warminster Municipal Authority require annual backflow testing?

Yes. Warminster runs a cross-connection control program, and any assembly protecting the public supply needs a certified test each year plus a test after any repair, relocation or replacement. We complete the gauge readings and file the report with the authority.

Can you test a fire line backflow assembly in Warminster?

Yes. We test double-check and RPZ assemblies on fire service and coordinate with your sprinkler contractor so the system is properly returned to service and the alarm company is not caught off guard by a flow signal.

How long will my Warminster business be without water?

Usually 15 to 30 minutes per device. For restaurants and shops on Street Road we schedule before opening or between the lunch and dinner rush so the shutdown does not cost you a service window.

How often does a backflow preventer have to be tested?

Once every 12 months for most authorities in Bucks and Montgomery County, plus a test any time the device is installed, repaired, relocated or replaced.

Who files the test report?

We do. The Warminster Municipal Authority runs the cross-connection control program here and expects a certified tester's report on file every year.

What does backflow testing cost in Warminster?

It depends on how many assemblies you have, their size, and whether a rebuild is needed. A single residential or irrigation device is a flat test fee; multi-device commercial sites are quoted per property. Call 215-364-0133 for a firm number before we schedule.

What happens if the device fails?

We show you which check or relief valve failed and what the fix costs. Most failures are worn rubber parts we carry on the truck, so the device is usually rebuilt and retested in the same visit. Obsolete or frozen bodies get a replacement quote instead.

Backflow Notice for a Warminster Property?

Angermeier Plumbing & Heating Inc · 739 Churchville Road, Southampton, PA 18966 · PA-certified backflow tester.

Call 215-364-0133